SH7709S Datasheet, PDF (256/807 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer Super RISC engine Family/SH7700 Series

Bits 14, 3, and 2—Internal Clock Frequency Division Ratio (IFC): These bits specify the
frequency division ratio of the internal clock with respect to the output frequency of PLL circuit 1.
Bit 14: IFC2 Bit 3: IFC1
Bit 2: IFC0
Description
0
0
0
×1
(Initial value)
0
0
1
× 1/2
1
0
0
× 1/3
0
1
0
× 1/4
Except above value
Reserved (Setting prohibited)
Note: Do not set the internal clock frequency lower than the CKIO pin frequency.
Bits 13, 1, and 0—Peripheral Clock Frequency Division Ratio (PFC): These bits specify the
division ratio of the peripheral clock frequency with respect to the frequency of the output
frequency of PLL circuit 1 or the frequency of the CKIO pin.
Bit 13: PFC2 Bit 1: PFC1
Bit 0: PFC0
Description
0
0
0
×1
0
0
1
× 1/2
1
0
0
× 1/3
0
1
0
× 1/4 (Initial value)
1
0
1
× 1/6
Except above value
Reserved (Setting prohibited)
Note: Do not set the peripheral clock frequency higher than the CKIO pin frequency.
Bits 12 to 9, 7, and 6—Reserved: These bits are always read as 0. The write value should always
be 0.
Bit 8—Reserved: This bit is always read as 1. The write value should always be 1.
Rev. 5.00, 09/03, page 212 of 760