HD6417750RF240V Datasheet, PDF (542/606 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer H8S Family/H8S/2600 Series

Section 21 Electrical Characteristics
Item
Current
dissipation^*2
(H8S/2614,
H8S/2616)
Normal
operation
Sleep mode
Symbol Min.
I_CC^*4
—
—
All modules
—
stopped
Medium-
—
speed mode
(φ/32)
Typ.
Max.
Unit
65
75
mA
V_CC = 5.0 V V_CC = 5.5 V
50
60
mA
V = 5.0 V V = 5.5 V
CC
CC
40
—
mA
45
—
mA
Test
Conditions
f = 20 MHz
f = 20 MHz,
V_CC = 5.0 V
(reference
values)
Standby
—
mode
—
Analog
During A/D Al
—
CC
power supply conversion
current
Idle
—
2.0
5.0
µA T_a ≤ 50°C
—
20
µA 50°C < T_a
2.5
4.0
mA AV = 5.0 V
CC
—
5.0
µA
RAM standby voltage
V_RAM
2.0
—
—
V
Notes: 1. If the A/D converter is not used, do not leave the AV_CC, and AV_SS pins open. Apply a
voltage between 4.5 V and 5.5 V to the AV pin by connecting them to V , for
CC
CC
instance.
2. Current dissipation values are for V_IH = V_CC (EXTAL), AV_CC (ports 4 and 9), or V_CC (other),
and V_IL = 0 V, with all output pins unloaded and the on-chip MOS pull-up transistors in
the off state.
3. I_CC depends on V_CC and f as follows:
I_CC (max.) = 27 + (0.435 × V_CC × f) (normal operation)
I_CC (max.) = 27 + (0.3 × V_CC × f) (sleep mode)
4. I_CC depends on V_CC and f as follows:
I (max.) = 5 + (0.45 × V × f) (normal operation)
CC
CC
I_CC (max.) = 5 + (0.35 × V_CC × f) (sleep mode)
5. Available only in H8S/2616 and H8S/2614.
Rev. 7.00 Sep. 11, 2009 Page 506 of 566
REJ09B0211-0700