SH7052 Datasheet, PDF (89/919 Pages) Renesas Technology Corp – SuperHTM RISC engine

5.1.3 Exception Processing Vector Table
Before exception processing begins running, the exception processing vector table must be set in
memory. The exception processing vector table stores the start addresses of exception service
routines. (The reset exception processing table holds the initial values of PC and SP.)
All exception sources are given different vector numbers and vector table address offsets, from
which the vector table addresses are calculated. During exception processing, the start addresses of
the exception service routines are fetched from the exception processing vector table, which is
indicated by this vector table address.
Table 5.3 shows the vector numbers and vector table address offsets. Table 5.4 shows how vector
table addresses are calculated.
Table 5.3 Exception Processing Vector Table
Exception Sources
Power-on reset
PC
SP
Manual reset
PC
SP
General illegal instruction
(Reserved by system)
Slot illegal instruction
(Reserved by system)
CPU address error
DMAC address error
Interrupts
NMI
User break
(Reserved by system)
Vector
Numbers
0
1
2
3
4
5
6
7
8
9
10
11
12
13
:
31
Vector Table Address Offset
H'00000000 to H'00000003
H'00000004 to H'00000007
H'00000008 to H'0000000B
H'0000000C to H'0000000F
H'00000010 to H'00000013
H'00000014 to H'00000017
H'00000018 to H'0000001B
H'0000001C to H'0000001F
H'00000020 to H'00000023
H'00000024 to H'00000027
H'00000028 to H'0000002B
H'0000002C to H'0000002F
H'00000030 to H'00000033
H'00000034 to H'00000037
:
H'0000007C to H'0000007F
63