SH7052 Datasheet, PDF (246/919 Pages) Renesas Technology Corp – SuperHTM RISC engine

• Bits 7 and 6—I/O Control 0D1 and 0D0 (IO0D1, IO0D0): These bits select TIOD pin input
capture signal edge detection.
Bit 7: IO0D1
0
1
Bit 6: IO0D0
0
1
0
1
Description
Input capture disabled (input capture possible in TCNT10B
compare-match)
(Initial value)
Input capture in ICR0D on rising edge
Input capture in ICR0D on falling edge
Input capture in ICR0D on both rising and falling edges
• Bits 5 and 4—I/O Control 0C1 and 0C0 (IO0C1, IO0C0): These bits select TIOC pin input
capture signal edge detection.
Bit 5: IO0C1
0
1
Bit 4: IO0C0
0
1
0
1
Description
Input capture disabled
(Initial value)
Input capture in ICR0C on rising edge
Input capture in ICR0C on falling edge
Input capture in ICR0C on both rising and falling edges
• Bits 3 and 2—I/O Control 0B1 and 0B0 (IO0B1, IO0B0): These bits select TIOB pin input
capture signal edge detection.
Bit 3: IO0B1
0
1
Bit 2: IO0B0
0
1
0
1
Description
Input capture disabled
(Initial value)
Input capture in ICR0B on rising edge
Input capture in ICR0B on falling edge
Input capture in ICR0B on both rising and falling edges
• Bits 1 and 0—I/O Control 0A1 and 0A0 (IO0A1, IO0A0): These bits select TIOA pin input
capture signal edge detection.
Bit 1: IO0A1
0
1
Bit 0: IO0A0
0
1
0
1
Description
Input capture disabled
(Initial value)
Input capture in ICR0A on rising edge
Input capture in ICR0A on falling edge
Input capture in ICR0A on both rising and falling edges
220