SH7052 Datasheet, PDF (685/919 Pages) Renesas Technology Corp – SuperHTM RISC engine

• Bit 10—PK5 Mode Bit (PK5MD): Selects the function of pin PK5/TO8F.
Bit 10: PK5MD
0
1
Description
General input/output (PK5)
ATU one-shot pulse output (TO8F)
(Initial value)
• Bit 9—Reserved: This bit always reads 0. The write value should always be 0.
• Bit 8—PK4 Mode Bit (PK4MD): Selects the function of pin PK4/TO8E.
Bit 8: PK4MD
0
1
Description
General input/output (PK4)
ATU one-shot pulse output (TO8E)
(Initial value)
• Bit 7—Reserved: This bit always reads 0. The write value should always be 0.
• Bit 6—PK3 Mode Bit (PK3MD): Selects the function of pin PK3/TO8D.
Bit 6: PK3MD
0
1
Description
General input/output (PK3)
ATU one-shot pulse output (TO8D)
(Initial value)
• Bit 5—Reserved: This bit always reads 0. The write value should always be 0.
• Bit 4—PK2 Mode Bit (PK2MD): Selects the function of pin PK2/TO8C.
Bit 4: PK2MD
0
1
Description
General input/output (PK2)
ATU one-shot pulse output (TO8C)
(Initial value)
• Bit 3—Reserved: This bit always reads 0. The write value should always be 0.
• Bit 2—PK1 Mode Bit (PK1MD): Selects the function of pin PK1/TO8B.
Bit 2: PK1MD
0
1
Description
General input/output (PK1)
ATU one-shot pulse output (TO8B)
(Initial value)
• Bit 1—Reserved: This bit always reads 0. The write value should always be 0.
659