SH7052 Datasheet, PDF (31/919 Pages) Renesas Technology Corp – SuperHTM RISC engine

Table 1.1 SH7052F/SH7053F/SH7054F Features (cont)
Item
Serial
communication
interface (SCI)
(5 channels)
Hitachi controller
area network
(HCAN)
(1 channel)
A/D converter
Advanced user
debugger (AUD)
I/O ports
(including timer
I/O pins, address
and data buses)
Features
• Selection of asynchronous or synchronous mode
• Simultaneous transmission/reception (full-duplex) capability
• Serial data communication possible between multiple processors
(asynchronous mode)
• Clock inversion function
• LSB-/MSB-first selection function for transmission
• CAN version: Bosch 2.0B active compatible
• Buffer size (per channel): Transmit/receive × 15, receive-only × 1
• Receive message filtering capability
• Sixteen channels
• Two sample-and-hold circuits
 Independent operation of 12 channels × 1 and 4 channels × 1
• Selection of two conversion modes
 Single conversion mode
 Scan mode
• Continuous scan mode
• Single-cycle scan mode
• Can be activated by external trigger or ATU-II compare-match
• 10-bit resolution
• Accuracy: ±2 LSB
• Eight dedicated pins
• RAM monitor mode
 Data input/output frequency: φ/4 or less
 Possible to read/write to a module connected to the internal/external
bus
• Branch address output mode
• Dual-function input/output pins: 135
• Schmitt input pins: NMI, IRQ, RES, HSTBY, FWE, TCLK, IC, IC/OC, SCK,
ADTRG
• Input port protection
5