SH7619 Datasheet, PDF (607/836 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7619 Series

Section 19 I/O Ports
Section 19 I/O Ports
This LSI has 26 ports (ports A, B, C, D, and E). Port A, port B, port C, port D, and port E are 10-
bit, 14-bit, 21-bit, 8-bit, and 25-bit I/O port, respectively. The pins of each port are multiplexed
with other functions. The pin function controller (PFC) handles the selection of multiplex pin
functions. Each port has a data register to store data of pin.
19.1 Port A
Port A of this LSI is an I/O port with ten pins as shown in figure 19.1.
Port A
PA16 (input/output)/A16 (output)
PA17 (input/output)/A17 (output)
PA18 (input/output)/A18 (output)
PA19 (input/output)/A19 (output)
PA20 (input/output)/A20 (output)
PA21 (input/output)/A21 (output)/SCK_SIO0 (input/output)
PA22 (input/output)/A22 (output)/SIOMCLK0 (input)
PA23 (input/output)/A23 (output)/RXD_SIO0 (input)
PA24 (input/output)/A24 (output)/TXD_SIO0 (output)
PA25 (input/output)/A25 (output)/SIOFSYNC0 (input/output)
Figure 19.1 Port A
19.1.1 Register Description
Port A is a 10-bit I/O port that has a following register. For details on the address of this register
and the states of this register in each processing state, see section 24, List of Registers.
• Port A data register H (PADRH)
19.1.2 Port A Data Register H (PADRH)
PADRH is a 16-bit readable/writable register which stores data for port A. Bits PA25DR to
PA16DR correspond to pins PA25 to PA16. (Description of multiplexed functions is omitted.)
Rev. 5.00 Mar. 15, 2007 Page 569 of 794
REJ09B0237-0500