XR72L52 Datasheet, PDF (91/480 Pages) Exar Corporation – TWO CHANNEL DS3/E3 FRAMER IC WITH HDLC CONTROLLER

xr
TWO CHANNEL DS3/E3 FRAMER IC WITH HDLC CONTROLLER
2.3.3.21 Receive E3 TTB-10 Register (E3, ITU-T G.832)
RXE3 TTB-10 REGISTER (ADDRESS = 0X26)
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
RxTTB-10
RO
RO
RO
RO
RO
0
0
0
0
0
BIT 2
RO
0
XRT72L52
REV. 1.0.1
BIT 1
RO
0
BIT 0
RO
0
This Read-Only register contains the eleventh (11th) byte within the 16 byte Trail Trace Buffer Message, that
has been received from the Remote Terminal. This register typical contains an ASCII character that is required
for the E.164 numbering format.
NOTE: For more information on the use of this register, refer to Section 6.3.2.9.
2.3.3.22 Receive E3 TTB-11 Register (E3, ITU-T G.832)
RXE3 TTB-11 REGISTER (ADDRESS = 0X27)
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
RxTTB-11
RO
RO
RO
RO
RO
RO
RO
RO
0
0
0
0
0
0
0
0
This Read-Only register contains the twelfth (12th) byte within the 16 byte Trail Trace Buffer Message, that has
been received from the Remote Terminal. This register typical contains an ASCII character that is required for
the E.164 numbering format.
NOTE: For more information on the use of this register, refer to Section 6.3.2.9.
2.3.3.23 Receive E3 TTB-12 Register (E3, ITU-T G.832)
RXE3 TTB-12 REGISTER (ADDRESS = 0X28)
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
RxTTB-12
RO
RO
RO
RO
RO
RO
RO
RO
0
0
0
0
0
0
0
0
This Read-Only register contains the thirteenth (13th) byte within the 16 byte Trail Trace Buffer Message, that
has been received from the Remote Terminal. This register typical contains an ASCII character that is required
for the E.164 numbering format.
NOTE: For more information on the use of this register, refer to Section 6.3.2.9.
2.3.3.24 Receive E3 TTB-13 Register (E3, ITU-T G.832)
RXE3 TTB-13 REGISTER (ADDRESS = 0X29)
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
RxTTB-13
RO
RO
RO
RO
RO
RO
RO
RO
0
0
0
0
0
0
0
0
75