M32C80 Datasheet, PDF (262/352 Pages) Renesas Technology Corp – 16/32-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY / M32C/80 SERIES

M32C/80 Group
20. X/Y Conversion
By reading the YjR register when the XYC0 bit in the XYC register is set to "1" (no data conversion), the
value written to the XiR register can be read directly. Figure 20.4 shows the conversion table when the
XYC0 bit is set to "1."
Address to be written
Address to be read
X0R register, Y0R register
X1R register, Y1R register
X2R register, Y2R register
X3R register, Y3R register
X4R register, Y4R register
X5R register, Y5R register
X6R register, Y6R register
X7R register, Y7R register
X8R register, Y8R register
X9R register, Y9R register
X10R register, Y10R register
X11R register, Y11R register
X12R register, Y12R register
X13R register, Y13R register
X14R register, Y14R register
X15R register, Y15R register
b15
b0
Bits in the XiR register
Bits in the YjR register
i=0 to 15
j=0 to 15
Figure 20.4 Conversion Table when Setting the XYC0 Bit to "1"
The XYC1 bit in the XYC register selects bit alignment of the value in the XiR register.
By writing to the XiR register while the XYC1 bit is set to "0" (no bit alignment conversion), bit alignment is
written as is. By writing to the XiR register while the XYC1 bit is set to "1" (bit sequence replaced), bit
alignment is written inversed.
Figure 20.5 shows the conversion table when the XYC1 bit is set to "1".
b15
b0
Data to be written
b15
b0
Bits in XiR register
(i=0 to 15)
Figure 20.5 Conversion Table when Setting the XYC1 Bit to "1"
Rev. 1.00 Nov. 01, 2005 ^{Page 243} of 330
REJ09B0271-0100