SAB82538 Datasheet, PDF (253/253 Pages) Infineon Technologies AG – ICs for Communications

SAB 82538
SAF 82538
Recommendation: Do not use RTS in clock mode 5 e.g. to enable drivers for TxD in a
bus configuration. (For example, use an arrangement of the type shown in the figure
below instead.)
b. The maximum achievable bit rates in internal timing modes (where bit timing is
extracted from the data by the ESCC8 by means of the internal DPLL) are:
1.2 Mbit/s when RxCLK is used as clock source for the baud rate generator (clock
modes 2, 3).
0.8 Mbit/s when XTAL1 (1, 2) is used to supply the clock source for the baud rate
generator (clock modes 6, 7).
Semiconductor Group
253