DS083 Datasheet, PDF (430/430 Pages) Xilinx, Inc – Summary of Features

R
Virtex-II Pro and Virtex-II Pro X Platform FPGAs: Pinout Information
Date
11/17/04
03/01/05
06/20/05
09/15/05
10/10/05
03/05/07
11/05/07
Version
4.1
4.2
4.3
4.4
4.5
4.6
4.7
Revision
• Table 4: Added requirement to V_BATT to connect pin to V_CCAUX or GND if battery is not
used.
• Table 3: Corrected number of Differential I/O Pairs for XC2VP30-FF1152 from 340 to
316.
• Table 4: Changed Direction for User I/O pins (IO_LXXY_#) from “Input/Output” to
“Input/Output/Bidirectional”.
No changes in Module 4 for this revision.
No changes in Module 4 for this revision.
No changes in Module 4 for this revision.
• Figure 2, page 29: Corrected NOTE 3.
• Figure 7, page 161: Updated with drawing showing correct heat sink profile and detail.
Updated copyright notice and legal disclaimer.
Notice of Disclaimer
THE XILINX HARDWARE FPGA AND CPLD DEVICES REFERRED TO HEREIN (“PRODUCTS”) ARE SUBJECT TO THE TERMS AND
CONDITIONS OF THE XILINX LIMITED WARRANTY WHICH CAN BE VIEWED AT http://www.xilinx.com/warranty.htm. THIS LIMITED
WARRANTY DOES NOT EXTEND TO ANY USE OF PRODUCTS IN AN APPLICATION OR ENVIRONMENT THAT IS NOT WITHIN THE
SPECIFICATIONS STATED IN THE XILINX DATA SHEET. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
PRODUCTS ARE NOT DESIGNED OR INTENDED TO BE FAIL-SAFE OR FOR USE IN ANY APPLICATION REQUIRING FAIL-SAFE
PERFORMANCE, SUCH AS LIFE-SUPPORT OR SAFETY DEVICES OR SYSTEMS, OR ANY OTHER APPLICATION THAT INVOKES
THE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). USE OF PRODUCTS IN CRITICAL APPLICATIONS IS AT THE SOLE RISK OF CUSTOMER, SUBJECT TO
APPLICABLE LAWS AND REGULATIONS.
Virtex-II Pro Data Sheet
The Virtex-II Pro Data Sheet contains the following modules:
• Virtex-II Pro and Virtex-II Pro X Platform FPGAs:
•
Introduction and Overview (Module 1)
• Virtex-II Pro and Virtex-II Pro X Platform FPGAs:
•
Functional Description (Module 2)
Virtex-II Pro and Virtex-II Pro X Platform FPGAs: DC
and Switching Characteristics (Module 3)
Virtex-II Pro and Virtex-II Pro X Platform FPGAs:
Pinout Information (Module 4)
DS083 (v4.7) November 5, 2007
Product Specification
www.xilinx.com
Module 4 of 4
302