English
Language : 

HD64F3048F16 Datasheet, PDF (543/903 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents
Section 14 Smart Card Interface
Section 14 Smart Card Interface
14.1 Overview
As an extension of its serial communication interface functions, SCI0 supports a smart card (IC
card) interface conforming to the ISO/IEC7816-3 (Identification Card) standard. Switchover
between normal serial communication and the smart card interface is controlled by a register
setting.
14.1.1 Features
Features of the smart-card interface supported by the H8/3048B Group are listed below.
• Asynchronous communication
 Data length: 8 bits
 Parity bits generated and checked
 Error signal output in receive mode (parity error)
 Error signal detect and automatic data retransmit in transmit mode
 Supports both direct convention and inverse convention
• Built-in baud rate generator with selectable bit rates
• Three types of interrupts
Transmit-data-empty, receive-data-full, and receive-error interrupts are requested
independently. The transmit-data-empty and receive-data-full interrupts can activate the DMA
controller (DMAC) to transfer data.
Rev. 3.00 Sep 27, 2006 page 515 of 872
REJ09B0325-0300