HD64F3048F16 Datasheet, PDF (372/903 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

Section 10 16-Bit Integrated Timer Unit (ITU)
general register. The corresponding IMFA or IMFB flag in TSR is set to 1 at the same time. The
valid edge or edges of the input capture signal are selected in TIOR.
TIOR settings are ignored in PWM mode, complementary PWM mode, and reset-synchronized
PWM mode.
General registers are linked to the CPU by an internal 16-bit bus and can be written or read by
either word access or byte access.
General registers are initialized to the output compare function (with no output signal) by a reset
and in standby mode. The initial value is H'FFFF.
10.2.9 Buffer Registers A, B (BRA, BRB)
The buffer registers are 16-bit registers. The ITU has four buffer registers, two each in channels 3
and 4.
Channel
3
4
Abbreviation
BRA3, BRB3
BRA4, BRB4
Function
Used for buffering
• When the corresponding GRA or GRB functions as an
output compare register, BRA or BRB can function as an
output compare buffer register: the BRA or BRB value is
automatically transferred to GRA or GRB at compare match
• When the corresponding GRA or GRB functions as an input
capture register, BRA or BRB can function as an input
capture buffer register: the GRA or GRB value is
automatically transferred to BRA or BRB at input capture
Bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Initial value 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Read/Write R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
A buffer register is a 16-bit readable/writable register that is used when buffering is selected.
Buffering can be selected independently by bits BFB4, BFA4, BFB3, and BFA3 in TFCR.
The buffer register and general register operate as a pair. When the general register functions as an
output compare register, the buffer register functions as an output compare buffer register. When
Rev. 3.00 Sep 27, 2006 page 344 of 872
REJ09B0325-0300