SA1110 Datasheet, PDF (78/406 Pages) Intel Corporation – Intel StrongARM SA-1110 Microprocessor

System Control Module
9.1.1.6
GPIO Alternate Function Register (GAFR)
The GPIO alternate function register (GAFR) contains 28 control bits that correspond to the 28
GPIO port pins. When the processor sets a bit in the GAFR, the corresponding GPIO pin is
switched over to that pin’s alternate function. See the following section for details on alternate
functions. This register is cleared to all zeros on all reset conditions.
0h 9004 001C
GAFR
Read/Write
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Reserved
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bits
n
31..28
Name
AFn
—
Description
GPIO alternate function bits (where n = 0 through 27).
A bit set in this register indicates that the corresponding GPIO pin is to be used for its
alternate function. A zero in this register indicates that the corresponding GPIO pin is to be
used for its normal GPIO function.
Reserved
9-8
SA-1110 Developer’s Manual