SA1110 Datasheet, PDF (232/406 Pages) Intel Corporation – Intel StrongARM SA-1110 Microprocessor

Peripheral Control Module
Figure 11-12. Passive Mode Pixel Clock and Data Pin Timing
L_FCLK
L_LCLK
L_PCLK
LDD[3:0]*
PCP = 1
Data Pins Sampled
by the Display
Pixels 0 through 3
Pixels 4 through 7
Data Pins Change
Pixels 8 through 11 Pixels 12 through 15
*DPD = 0
Notes:
PCP - Pixel clock polarity:
0 - Pixels driven from data pins on rising edge of pixel clock.
1 - Pixels driven from data pins on falling edge of pixel clock.
DPD - Dual pixel data mode:
0 - 4 data pins are used in single-panel monochrome mode.
1 - 8 data pins are used in single-panel monochrome mode.
A8100-01
11-52
SA-1110 Developer’s Manual