 English |
|
|
|
|
|
|
|
| MC3S12RG128 Datasheet, PDF (60/546 Pages) Freescale Semiconductor, Inc – Microcontrollers | |||
| |||
| ◁ |
Chapter 1 Device Overview (MC3S12RG128V1)
1.2.3.38 PM2 / RXCAN0 / MISO0 â Port M I/O Pin 2
PM2 is a general purpose input or output pin. It can be conï¬gured as the receive pin RXCAN of the
Freescale Scalable Controller Area Network controller 0 (CAN0). It can be conï¬gured as the master input
(during master mode) or slave output pin (during slave mode) MISO for the Serial Peripheral Interface 0
(SPI0).
1.2.3.39 PM1 / TXCAN0 â Port M I/O Pin 1
PM1 is a general purpose input or output pin. It can be conï¬gured as the transmit pin TXCAN of the
Freescale Scalable Controller Area Network controller 0 (CAN0).
1.2.3.40 PM0 / RXCAN0 â Port M I/O Pin 0
PM0 is a general purpose input or output pin. It can be conï¬gured as the receive pin RXCAN of the
Freescale Scalable Controller Area Network controller 0 (CAN0).
1.2.3.41 PP7 / KWP7 / PWM7 â Port P I/O Pin 7
PP7 is a general purpose input or output pin. It can be conï¬gured to generate an interrupt causing the MCU
to exit STOP or WAIT mode. It can be conï¬gured as Pulse Width Modulator (PWM) channel 7 output.
1.2.3.42 PP6 / KWP6 / PWM6 â Port P I/O Pin 6
PP6 is a general purpose input or output pin. It can be conï¬gured to generate an interrupt causing the MCU
to exit STOP or WAIT mode. It can be conï¬gured as Pulse Width Modulator (PWM) channel 6 output.
1.2.3.43 PP5 / KWP5 / PWM5 â Port P I/O Pin 5
PP5 is a general purpose input or output pin. It can be conï¬gured to generate an interrupt causing the MCU
to exit STOP or WAIT mode. It can be conï¬gured as Pulse Width Modulator (PWM) channel 5 output.
1.2.3.44 PP4 / KWP4 / PWM4 â Port P I/O Pin 4
PP4 is a general purpose input or output pin. It can be conï¬gured to generate an interrupt causing the MCU
to exit STOP or WAIT mode. It can be conï¬gured as Pulse Width Modulator (PWM) channel 4 output.
1.2.3.45 PP3 / KWP3 / PWM3 / SS1 â Port P I/O Pin 3
PP3 is a general purpose input or output pin. It can be conï¬gured to generate an interrupt causing the MCU
to exit STOP or WAIT mode. It can be conï¬gured as Pulse Width Modulator (PWM) channel 3 output. It
can be conï¬gured as slave select pin SS of the Serial Peripheral Interface 1 (SPI1).
1.2.3.46 PP2 / KWP2 / PWM2 / SCK1 â Port P I/O Pin 2
PP2 is a general purpose input or output pin. It can be conï¬gured to generate an interrupt causing the MCU
to exit STOP or WAIT mode. It can be conï¬gured as Pulse Width Modulator (PWM) channel 2 output. It
can be conï¬gured as serial clock pin SCK of the Serial Peripheral Interface 1 (SPI1).
MC3S12RG128 Data Sheet, Rev. 1.05
60
Freescale Semiconductor
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese