MC3S12RG128 Datasheet, PDF (114/546 Pages) Freescale Semiconductor, Inc – Microcontrollers

Chapter 3 Module Mapping Control (MMCV5) Block Description
3.1.1 Features
• Registers for mapping of address space for on-chip RAM, EEPROM, and FLASH (or ROM)
memory blocks and associated registers
• Memory mapping control and selection based upon address decode and system operating mode
• Core address bus control
• Core data bus control and multiplexing
• Core security state decoding
• Emulation chip select signal generation (ECS)
• External chip select signal generation (XCS)
• Internal memory expansion
• External stretch and ROM mapping control functions via the MISC register
• Reserved registers for test purposes
• Configurable system memory options defined at integration of core into the system-on-a-chip
(SoC).
3.1.2 Modes of Operation
Some of the registers operate differently depending on the mode of operation (i.e., normal expanded wide,
special single chip, etc.). This is best understood from the register descriptions.
3.2 External Signal Description
All interfacing with the MMC sub-block is done within the core, it has no external signals.
3.3 Memory Map and Register Definition
A summary of the registers associated with the MMC sub-block is shown in Figure 3-2. Detailed
descriptions of the registers and bits are given in the subsections that follow.
MC3S12RG128 Data Sheet, Rev. 1.05
114
Freescale Semiconductor