HD64F2357F20V Datasheet, PDF (569/1049 Pages) Renesas Technology Corp – Hardware Manual Renesas 16-Bit Single-chip Microcomputer H8S Family / H8S/2300 Series

Section 16 A/D Converter
16.1 Overview
The H8S/2357 Group incorporates a successive approximation type 10-bit A/D converter that allows up to eight analog
input channels to be selected.
16.1.1 Features
A/D converter features are listed below
• 10-bit resolution
• Eight input channels
• Settable analog conversion voltage range
 Conversion of analog voltages with the reference voltage pin (V_ref) as the analog reference voltage
• High-speed conversion
 Minimum conversion time: 6.7 µs per channel (at 20 MHz operation)
• Choice of single mode or scan mode
 Single mode: Single-channel A/D conversion
 Scan mode: Continuous A/D conversion on 1 to 4 channels
• Four data registers
 Conversion results are held in a 16-bit data register for each channel
• Sample and hold function
• Three kinds of conversion start
 Choice of software or timer conversion start trigger (TPU or 8-bit timer), or ADTRG pin
• A/D conversion end interrupt generation
 A/D conversion end interrupt (ADI) request can be generated at the end of A/D conversion
• Module stop mode can be set
 As the initial setting, A/D converter operation is halted. Register access is enabled by exiting module stop mode.
Rev.6.00 Oct.28.2004 page 539 of 1016
REJ09B0138-0600H