HD64F2357F20V Datasheet, PDF (446/1049 Pages) Renesas Technology Corp – Hardware Manual Renesas 16-Bit Single-chip Microcomputer H8S Family / H8S/2300 Series

11.2.2 Output Data Registers H and L (PODRH, PODRL)
PODRH
Bit
:
Initial value :
R/W
:
7
POD15
0
R/(W)*
6
POD14
0
R/(W)*
5
POD13
0
R/(W)*
4
POD12
0
R/(W)*
3
POD11
0
R/(W)*
2
POD10
0
R/(W)*
1
POD9
0
R/(W)*
0
POD8
0
R/(W)*
PODRL
Bit
:
Initial value :
R/W
:
7
POD7
0
R/(W)*
6
POD6
0
R/(W)*
5
POD5
0
R/(W)*
4
POD4
0
R/(W)*
3
POD3
0
R/(W)*
2
POD2
0
R/(W)*
1
POD1
0
R/(W)*
0
POD0
0
R/(W)*
Note: * A bit that has been set for pulse output by NDER is read-only.
PODRH and PODRL are 8-bit readable/writable registers that store output data for use in pulse output.
11.2.3 Next Data Registers H and L (NDRH, NDRL)
NDRH and NDRL are 8-bit readable/writable registers that store the next data for pulse output. During pulse output, the
contents of NDRH and NDRL are transferred to the corresponding bits in PODRH and PODRL when the TPU compare
match event specified by PCR occurs. The NDRH and NDRL addresses differ depending on whether pulse output groups
have the same output trigger or different output triggers. For details see section 11.2.4, Notes on NDR Access.
NDRH and NDRL are each initialized to H'00 by a reset and in hardware standby mode. They are not initialized in
software standby mode.
11.2.4 Notes on NDR Access
The NDRH and NDRL addresses differ depending on whether pulse output groups have the same output trigger or
different output triggers.
Same Trigger for Pulse Output Groups: If pulse output groups 2 and 3 are triggered by the same compare match event,
the NDRH address is H'FF4C. The upper 4 bits belong to group 3 and the lower 4 bits to group 2. Address H'FF4E
consists entirely of reserved bits that cannot be modified and are always read as 1.
Address H'FF4C
Bit
:
Initial value :
R/W
:
7
NDR15
0
R/W
6
NDR14
0
R/W
5
NDR13
0
R/W
4
NDR12
0
R/W
3
NDR11
0
R/W
2
NDR10
0
R/W
1
NDR9
0
R/W
0
NDR8
0
R/W
Rev.6.00 Oct.28.2004 page 416 of 1016
REJ09B0138-0600H