HD64F2357F20V Datasheet, PDF (398/1049 Pages) Renesas Technology Corp – Hardware Manual Renesas 16-Bit Single-chip Microcomputer H8S Family / H8S/2300 Series

10.2.10 Module Stop Control Register (MSTPCR)
MSTPCRH
MSTPCRL
Bit
: 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Initial value : 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1
R/W
: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
MSTPCR is a 16-bit readable/writable register that performs module stop mode control.
When the MSTP13 bit in MSTPCR is set to 1, TPU operation stops at the end of the bus cycle and a transition is made to
module stop mode. Registers cannot be read or written to in module stop mode. For details, see section 21.5, Module Stop
Mode.
MSTPCR is initialized to H'3FFF by a reset and in hardware standby mode. It is not initialized in software standby mode.
Bit 13—Module Stop (MSTP13): Specifies the TPU module stop mode.
Bit 13
MSTP13
0
1
Description
TPU module stop mode cleared
TPU module stop mode set
(Initial value)
Rev.6.00 Oct.28.2004 page 368 of 1016
REJ09B0138-0600H