HD64F2357F20V Datasheet, PDF (418/1049 Pages) Renesas Technology Corp – Hardware Manual Renesas 16-Bit Single-chip Microcomputer H8S Family / H8S/2300 Series

10.4.7 Phase Counting Mode
In phase counting mode, the phase difference between two external clock inputs is detected and TCNT is
incremented/decremented accordingly. This mode can be set for channels 1, 2, 4, and 5.
When phase counting mode is set, an external clock is selected as the counter input clock and TCNT operates as an
up/down-counter regardless of the setting of bits TPSC2 to TPSC0 and bits CKEG1 and CKEG0 in TCR. However, the
functions of bits CCLR1 and CCLR0 in TCR, and of TIOR, TIER, and TGR are valid, and input capture/compare match
and interrupt functions can be used.
When overflow occurs while TCNT is counting up, the TCFV flag in TSR is set; when underflow occurs while TCNT is
counting down, the TCFU flag is set.
The TCFD bit in TSR is the count direction flag. Reading the TCFD flag provides an indication of whether TCNT is
counting up or down.
Table 10-8 shows the correspondence between external clock pins and channels.
Table 10-8 Phase Counting Mode Clock Input Pins
Channels
When channel 1 or 5 is set to phase counting mode
When channel 2 or 4 is set to phase counting mode
External Clock Pins
A-Phase
B-Phase
TCLKA
TCLKB
TCLKC
TCLKD
Example of Phase Counting Mode Setting Procedure: Figure 10-28 shows an example of the phase counting mode
setting procedure.
Phase counting mode
Select phase counting mode [1]
[1] Select phase counting mode with bits MD3 to
MD0 in TMDR.
[2] Set the CST bit in TSTR to 1 to start the count
operation.
Start count
[2]
<Phase counting mode>
Figure 10-28 Example of Phase Counting Mode Setting Procedure
Examples of Phase Counting Mode Operation: In phase counting mode, TCNT counts up or down according to the
phase difference between two external clocks. There are four modes, according to the count conditions.
• Phase counting mode 1
Figure 10-29 shows an example of phase counting mode 1 operation, and table 10-9 summarizes the TCNT up/down-
count conditions.
Rev.6.00 Oct.28.2004 page 388 of 1016
REJ09B0138-0600H