EP4CE30F29C7N Datasheet, PDF (373/488 Pages) Altera Corporation – Cyclone IV Device Handbook, Volume 1

Chapter 1: Cyclone IV Transceivers Architecture
Document Revision History
1–93
Document Revision History
Table 1–30 lists the revision history for this chapter.
Table 1–30. Document Revision History
Date
October 2013
May 2013
October 2012
November 2011
December 2010
November 2010
July 2010
Version
3.6
3.5
3.4
3.3
3.2
3.1
3.0
Changes
Updated Figure 1–15 and Table 1–4.
Updated Table 1–27 by setting “rx_locktodata” and “rx_locktorefclk” to “Input”
■ Updated the data rate for the V-by-one protocol and the F324 package support in
HD-SDI in Table 1–1.
■ Updated note (1) to Figure 1–27.
■ Added latency information to Figure 1–67.
■ Updated “Word Aligner” and “Basic Mode” sections.
■ Updated Figure 1–37.
■ Updated for the Quartus II software version 10.1 release.
■ Updated Table 1–1, Table 1–5, Table 1–11, Table 1–14, Table 1–24, Table 1–25,
Table 1–26, Table 1–27, Table 1–28, and Table 1–29.
■ Updated “8B/10B Encoder”, “Transmitter Output Buffer”, “Receiver Input Buffer”,
“Clock Data Recovery”, “Miscellaneous Transmitter PCS Features”, “Miscellaneous
Receiver PCS Feature”, “Input Reference Clocking”, “PCI Express (PIPE) Mode”,
“Channel Deskewing”, “Lane Synchronization”, “Serial Loopback”, and “Self Test
Modes” sections.
■ Added Figure 1–9, Figure 1–10, Figure 1–19, Figure 1–20, and Figure 1–43.
■ Updated Figure 1–53, Figure 1–55, Figure 1–59, Figure 1–60, Figure 1–69,
Figure 1–70, Figure 1–71, Figure 1–72, Figure 1–73, and Figure 1–74.
Updated Introductory information.
■ Updated information for the Quartus II software version 10.0 release.
■ Reset control, power down, and dynamic reconfiguration information moved to
new Cyclone IV Reset Control and Power Down and Cyclone IV Dynamic
Reconfiguration chapters.
October 2013 Altera Corporation
Cyclone IV Device Handbook,
Volume 2