EP4CE30F29C7N Datasheet, PDF (307/488 Pages) Altera Corporation – Cyclone IV Device Handbook, Volume 1

Chapter 1: Cyclone IV Transceivers Architecture
Transceiver Clocking Architecture
1–27
Input Reference Clocking
When used for transceiver, the left PLLs synthesize the input reference clock to
generate the required clocks for the transceiver channels. Figure 1–25 and Figure 1–26
show the sources of input reference clocks for PLLs used in the transceiver operation.
1 Clock output from PLLs in the FPGA core cannot feed into PLLs used by the
transceiver as input reference clock.
Figure 1–25. PLL Input Reference Clocks in Transceiver Operation for F324 and Smaller
Packages ⁽¹⁾, ⁽²⁾
REFCLK1
MPLL_2
Transceiver
Block
GXBL0
MPLL_1
REFCLK0
Notes to Figure 1–25:
(1) The REFCLK0 and REFCLK1 pins are dual-purpose CLK, REFCLK, or DIFFCLK pins that reside in banks 3A and 8A
respectively.
(2) Using any clock input pins other than the designated REFCLK pins as shown here to drive the MPLLs may have
reduced jitter performance.
October 2013 Altera Corporation
Cyclone IV Device Handbook,
Volume 2