SH7606 Datasheet, PDF (341/532 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperH™ RISC engine Family / SH7606 Series

Section 13 Host Interface (HIF)
13.4.8 HIF Data Register (HIFDATA)
HIFDATA is a 32-bit register used to hold data to be written to HIFRAM and data read from
HIFRAM for external device accesses. If HIFDATA is not used when accessing HIFRAM, it can
be used for data transfer between an external device connected to the HIF and the on-chip CPU.
HIFDATA can be read from and written to by the on-chip CPU. Access to HIFDATA by an
external device should be performed with HIFDATA specified by bits REG5 to REG0 in HIFIDX
and the HIFRS pin low.
Initial
Bit
Bit Name Value R/W Description
31 to 0 D31 to D0 All 0
R/W 32-bit Data
13.4.9 HIF Boot Control Register (HIFBCR)
HIFBCR is a 32-bit register for exclusive control of an external device and the on-chip CPU
regarding access of HIFRAM. HIFBCR can be only read by the on-chip CPU. Access to HIFBCR
by an external device should be performed with HIFBCR specified by bits REG5 to REG0 in
HIFIDX and the HIFRS pin low.
Initial
Bit
Bit Name Value R/W Description
31 to 8 —
All 0
R
Reserved
These bits are always read as 0. The write value should
always be 0.
7 to 1 —
All 0
R/W AC-Bit Writing Assistance
These bits should be used to write the bit pattern (H'A5)
needed to set the AC bit to 1. These bits are always
read as 0.
Rev. 4.00 Sep. 13, 2007 Page 315 of 502
REJ09B0239-0400