MC68HC912BD32 Datasheet, PDF (89/292 Pages) Freescale Semiconductor, Inc – Advance Information

Freescale Semiconductor, Inc.
EEPROM
EEPROM Control Registers
Table 15 768-byte EEPROM Block Protection
Bit Name
BPROT4
BPROT3
BPROT2
BPROT1
BPROT0
Block Protected
$0D00 to $0DFF
$0E00 to $0EFF
$0F00 to $0F7F
$0F80 to $0FBF
$0FC0 to $0FFF
Block Size
256 Bytes
256 Bytes
128 Bytes
64 Bytes
64 Bytes
EETST — EEPROM Test
$00F2
Bit 7
6
5
4
3
2
EEODD EEVEN MARG EECPD EECPRD
0
RESET:
0
0
0
0
0
0
1
EECPM
0
Bit 0
0
0
Read anytime. Write in special modes only (SMODN = 0). These bits
are used for test purposes only. In normal modes the bits are forced
to zero.
EEODD — Odd Row Programming
0 = Odd row bulk programming/erasing is disabled.
1 = Bulk program/erase all odd rows.
EEVEN — Even Row Programming
0 = Even row bulk programming/erasing is disabled.
1 = Bulk program/erase all even rows.
MARG — Program and Erase Voltage Margin Test Enable
0 = Normal operation.
1 = Program and Erase Margin test.
This bit is used to evaluate the program/erase voltage margin.
EECPD — Charge Pump Disable
0 = Charge pump is turned on during program/erase.
1 = Disable charge pump.
EECPRD — Charge Pump Ramp Disable
Known to enhance write/erase endurance of EEPROM cells.
0 = Charge pump is turned on progressively during program/erase.
1 = Disable charge pump controlled ramp up.
5-eeprom
EEPROM
For More Information On This Product,
Go to: www.freescale.com
MC68HC912BD32 Rev 1.0