English
Language : 

MC68HC912BD32 Datasheet, PDF (286/292 Pages) Freescale Semiconductor, Inc – Advance Information
Glossary
Freescale Semiconductor, Inc.
memory location — Each M68HC12 memory location holds one byte of data and has a unique
address. To store information in a memory location, the CPU places the address of the
location on the address bus, the data information on the data bus, and asserts the write
signal. To read information from a memory location, the CPU places the address of the
location on the address bus and asserts the read signal. In response to the read signal,
the selected memory location places its data onto the data bus.
memory map — A pictorial representation of all memory locations in a computer system.
MI-Bus — See "Motorola interconnect bus".
microcontroller — Microcontroller unit (MCU). A complete computer system, including a CPU,
memory, a clock oscillator, and input/output (I/O) on a single integrated circuit.
modulo counter — A counter that can be programmed to count to any number from zero to its
maximum possible modulus.
most significant bit (MSB) — The leftmost digit of a binary number.
Motorola interconnect bus (MI-Bus) — The Motorola Interconnect Bus (MI Bus) is a serial
communications protocol which supports distributed real-time control efficiently and with
a high degree of noise immunity.
Motorola scalable CAN (msCAN) — The Motorola scalable controller area network is a serial
communications protocol that efficiently supports distributed real-time control with a very
high level of data integrity.
msCAN — See "Motorola scalable CAN".
MSI — See "multiple serial interface".
multiple serial interface — A module consisting of multiple independent serial I/O sub-systems,
e.g. two SCI and one SPI.
multiplexer — A device that can select one of a number of inputs and pass the logic level of that
input on to the output.
nibble — A set of four bits (half of a byte).
object code — The output from an assembler or compiler that is itself executable machine code,
or is suitable for processing to produce executable machine code.
opcode — A binary code that instructs the CPU to perform an operation.
open-drain — An output that has no pullup transistor. An external pullup device can be
connected to the power supply to provide the logic 1 output voltage.
MC68HC912BD32 Rev 1.0
Glossary
For More Information On This Product,
Go to: www.freescale.com