UPSD3354DV-40U6 Datasheet, PDF (248/272 Pages) STMicroelectronics – fast 8032 MCU with programmable logic

DC and AC parameters
UPSD33xx
Table 165. Major parameters
Parameter
Test conditions/comments
5.0 V value
3.3 V value Unit
Operating voltage
Operating temperature
MCU frequency
Typical Active current (20% of
PLD used; 25 °C operation)
–
–
8 MHz (min) for I²C
40 MHz crystal, Turbo
40 MHz crystal, Non-Turbo
8 MHz crystal, Turbo
8 MHz crystal, Non-Turbo
4.5 to 5.5 (PSD);
3.0 to 3.6
V
3.0 to 3.6 (MCU) (PSD and MCU)
–40 to 85
–40 to 85
°C
1 Min, 40 Max 1 Min, 40 Max MHz
50
40
mA
48
38
mA
21
18
mA
10
8
mA
40 MHz crystal divided by 2048
Typical Idle current (20% of PLD
used; 25 °C operation)
internally.
16
All interfaces are disabled.
11
mA
Typical Standby current
t(s) I/O sink/source current, Ports A,
c _{B, C, and D}
rodu ^{I/O sink/source current, Port 4}
P _{PLD macrocells}
olete ^{PLD inputs}
bs _{PLD Outputs}
) ^{- O Typical PLD propagation delay,}
Obsolete ^{Product(s Turbo mode}
Power-down mode
needs reset to exit.
V_OL = 0.45 V (max);
V_OH = 2.4 V (min)
V_OL = 0.6 V (max);
V_OH = 2.4 V (min)
For registered or
combinatorial logic
Inputs from pins, feedback,
or MCU addresses
Output to pins or
internal feedback
PLD input to output
140
120
µA
I_OL = 8 (max);
I_OH = –2 (min)
I_OL = 10 (max);
I_OH = –10 (min)
I_OL = 4 (max); _mA
I_OH = –1 (min)
I_OL = 10 (max); _mA
I_OH = –10 (min)
16
16
–
69
69
–
18
18
–
15
22
ns
248/272
Doc ID 9685 Rev 7