|
Z86E3016PSG Datasheet, PDF (40/348 Pages) Zilog, Inc. – Z86E3016PSG | |||
|
◁ |
Z8 Family of Microcontrollers
User Manual
22
The Z8® CPU uses a 16-bit Program Counter (PC) to determine the
sequence of current program instructions. The PC is not an addressable
register.
Peripheral registers are used to transfer data, conï¬gure the operating
mode, and control the operation of the on-chip peripherals. Any instruc-
tion that references the register ï¬le can access the peripheral registers.
The peripheral registers are:
⢠Serial I/O (SIO)
⢠Timer Mode (TMR)
⢠Timer/Counter 0 (T0)
⢠T0 Prescaler (PRE0)
⢠Timer/Counter 1 (T1)
⢠T1 Prescaler (PRE1)
⢠Port 0â1 Mode (P01M)
⢠Port 2 Mode (P2M)
⢠Port 3 Mode (P3M)
In addition, the four port registers (P0âP3) are considered to be peripheral
registers.
Expanded Z8 Registers
The expanded Z8 control registers govern the operation of additional fea-
tures or peripherals. Any instruction which references the register ï¬le can
access these registers.
The ERF contains the control registers for WDT, Port Control, Serial
Peripheral Interface (SPI), and the SMR functions. Figure 6 on page 15
shows the layout of the Register Banks in the ERF. Register Bank C in the
ERF consists of the registers for the SPI. Table 8 shows the registers
within ERF Bank C, Working Register Group 0.
Address Space
UM001602-0904
|
▷ |