HD6417034 Datasheet, PDF (486/691 Pages) Renesas Technology Corp – SuperH RISC ENGINE SH7032 AND SH7034

Addresses in MCU
modes 0, 1, and 2*
H'0000000
Addresses in
PROM mode
H'0000
On-chip
ROM space
(area 0)
H'000FFFF
H'FFFF
Note: * Addresses in the figure are the uppermost shadow addresses of the on-chip ROM space.
Figure 17.3 Memory Map of On-chip ROM
17.3 PROM Programming
The write/verify specifications in PROM mode are the same as for the standard EPROM
HN27C101. Page programming is not supported, so do not set the PROM programmer to page
programming mode. Naturally, PROM programmers that only support page programming mode
cannot be used. When selecting a PROM programmer, check that the byte-by-byte high-speed,
high-reliability programming method is supported.
17.3.1 Selecting the Programming Mode
There are two on-chip PROM programming modes: write and verify (which reads and confirms
the data written). Use the pins to select the modes (table 17.2).
450