|
EP2S180F1020C4 Datasheet, PDF (418/768 Pages) Altera Corporation – Stratix II Device Handbook, Volume 1 | |||
|
◁ |
Stratix II and Stratix II GX DDR Memory Support Overview
Figure 3â8. DQS and DQSn Pins and the DQS Phase-Shift Circuitry Note (1)
DQSn
Pin
DQS
Pin
DQSn
Pin
DQS
Pin
CLK[15..12]p (2)
From PLL 5 (3)
DQS
Pin
DQSn
Pin
Ît
Ît
DQS
Ît
Ît
Phase-Shift
Ît
Ît
Circuitry
DQS
Pin
DQSn
Pin
Ît
Ît
DQS Logic
Blocks
to IOE
to IOE
to IOE
to IOE
to IOE
to IOE
to IOE
to IOE
Notes to Figure 3â8:
(1) There are up to 18 pairs of DQS and DQSn pins available on the top or the bottom of the Stratix II or Stratix II GX
device, up to 8 on the left side of the DQS phase-shift circuitry (I/O banks 3 and 8), and up to 10 on the right side
(I/O bank 4 and 7).
(2) Clock pins CLK[15..12]p feed the phase-shift circuitry on the top of the device and clock pins CLK[7..4]p feed
the phase-shift circuitry on the bottom of the device. You can also use a phase-locked loop (PLL) clock output as a
reference clock to the phase-shift circuitry. The reference clock can also be used in the logic array.
(3) You can only use PLL 5 to feed the DQS phase-shift circuitry on the top of the device and PLL 6 to feed the DQS
phase-shift circuitry on the bottom of the device.
Figure 3â9 shows the connections between the DQS phase-shift circuitry
and the DQS logic block.
3â22
Stratix II Device Handbook, Volume 2
Altera Corporation
January 2008
|
▷ |