EP2S180F1020C4 Datasheet, PDF (396/768 Pages) Altera Corporation – Stratix II Device Handbook, Volume 1

Referenced Documents
Referenced
Documents
This chapter references the following documents:
■ AN 207: TriMatrix Memory Selection Using the Quartus II Software
■ AN 210: Converting Memory from Asynchronous to Synchronous for
Stratix and Stratix GX Designs
■ FIFO Partitioner Megafunction User Guide
■ Single- and Dual-Clock FIFO Megafunctions User Guide
■ Stratix II Device Family Data Sheet (volume 1) of the Stratix II Device
Handbook
■ Stratix II GX Device Family Data Sheet (volume 1) of the Stratix II GX
Device Handbook
■ Using Parity to Detect Memory Errors white paper
Document
Table 2–15 shows the revision history for this chapter.
Revision History
Table 2–15. Document Revision History
Date and
Document
Version
Changes Made
January 2008, Added “Referenced Documents” section.
v4.5
Minor text edits.
No change
For the Stratix II GX Device Handbook only:
Formerly chapter 7. The chapter number changed due to
the addition of the Stratix II GX Dynamic Reconfiguration
chapter. No content change.
May 2007,
v4.4
Added note to “Byte Enable Functional Waveform” section.
Updated “Byte Enable Support” section.
February 2007 Added the “Document Revision History” section to this
v4.3
chapter.
April 2006,
v4.2
Chapter updated as part of the Stratix II Device Handbook
update.
No change
Formerly chapter 6. Chapter number change only due to
chapter addition to Section I in February 2006; no content
change.
December
2005, v4.1
Chapter updated as part of the Stratix II Device Handbook
update.
October 2005 Added chapter to the Stratix II GX Device Handbook.
v4.0
Summary of Changes
—
—
—
—
—
—
—
—
—
—
2–36
Stratix II Device Handbook, Volume 2
Altera Corporation
January 2008