MC9S12GRMV1 Datasheet, PDF (764/1292 Pages) Freescale Semiconductor, Inc – MC9S12G Family Reference Manual and Data Sheet

Timer Module (TIM16B8CV3)
NOTE
The newly selected prescale factor will not take effect until the next
synchronized edge where all prescale counter stages equal zero.
23.3.2.12 Main Timer Interrupt Flag 1 (TFLG1)
Module Base + 0x000E
7
R
C7F
W
6
C6F
5
C5F
4
C4F
3
C3F
2
C2F
1
C1F
0
C0F
Reset
0
0
0
0
0
0
0
0
Figure 23-20. Main Timer Interrupt Flag 1 (TFLG1)
Read: Anytime
Write: Used in the clearing mechanism (set bits cause corresponding bits to be cleared). Writing a zero
will not affect current status of the bit.
Table 23-16. TRLG1 Field Descriptions
Note: Writing to unavailable bits has no effect. Reading from unavailable bits return a zero.
Field
7:0
C[7:0]F
Description
Input Capture/Output Compare Channel “x” Flag — These flags are set when an input capture or output
compare event occurs. Clearing requires writing a one to the corresponding flag bit while TEN or PAEN is set to
one.
Note: When TFFCA bit in TSCR register is set, a read from an input capture or a write into an output compare
channel (0x0010–0x001F) will cause the corresponding channel flag CxF to be cleared.
23.3.2.13 Main Timer Interrupt Flag 2 (TFLG2)
Module Base + 0x000F
7
6
5
4
3
2
1
0
R
0
0
0
0
0
0
0
TOF
W
Reset
0
0
0
0
0
0
0
0
Unimplemented or Reserved
Figure 23-21. Main Timer Interrupt Flag 2 (TFLG2)
TFLG2 indicates when interrupt conditions have occurred. To clear a bit in the flag register, write the bit
to one while TEN bit of TSCR1 or PAEN bit of PACTL is set to one.
Read: Anytime
Write: Used in clearing mechanism (set bits cause corresponding bits to be cleared).
MC9S12G Family Reference Manual, Rev.1.23
766
Freescale Semiconductor