MC9S12GRMV1 Datasheet, PDF (1205/1292 Pages) Freescale Semiconductor, Inc – MC9S12G Family Reference Manual and Data Sheet

Electrical Characteristics
Table A-14. Peripheral Configurations for Run & Wait Current Measurement
Peripheral
Configuration
TIM
The peripheral shall be configured to output compare mode,
pulse accumulator and modulus counter enabled.
COP & RTI
Both modules are enabled.
ACMP¹
The module is enabled with analog output on. The ACMPP
and ACMPM are toggling with 0-1 and 1-0.
DAC²
DAC0 and DAC1 is buffered at full voltage range
(DACxCTL = $87).
RVA³
The module is enabled and ADC is running at 6.25MHz with
maximum bus freq
1 _{Onlly available on S12GN16, S12GN32, S12GN48, S12G48, and S12G64}
2 _{Only available on S12G192, S12GA192, S12G340, and S12GA240}
3 _{Only available on S12GA192 and S12GA240}
Table A-15. Run and Wait Current Characteristics (Junction Temperature From –40°C To +150°C)
Conditions are: V_DDR=5.5V, T_A=125°C, see Table A-13. and Table A-14.
Num C
Rating
Symbol
Min
Typ
Max
Unit
S12GN16, S12GN32
1 P IDD Run Current (code execution from RAM)
2 C IDD Run Current (code execution from flash)
3 P IDD Wait Current
S12GN48, S12G48, S12G64
4 P IDD Run Current (code execution from RAM)
5 C IDD Run Current (code execution from flash)
6 P IDD Wait Current
S12G96, S12G128
7 P IDD Run Current (code execution from RAM)
8 C IDD Run Current (code execution from flash)
9 P IDD Wait Current
S12G192, S12GA192, S12G240, S12GA240
10 P IDD Run Current (code execution from RAM)
11 C IDD Run Current (code execution from flash)
12 P IDD Wait Current
I_DDRr
I_DDRf
I_DDW
I_DDRr
I_DDRf
I_DDW
I_DDRr
I_DDRf
I_DDW
I_DDRr
I_DDRf
I_DDW
12.5
16
mA
13
17
mA
7.2
10
mA
14
19
mA
15.5
20
mA
8.7
11
mA
15
21
mA
17
22
mA
9
11.5
mA
18
22.5
mA
17
23.5
mA
9.5
12
mA
Freescale Semiconductor
MC9S12G Family Reference Manual, Rev.1.23
1207