MC9S12GRMV1 Datasheet, PDF (1149/1292 Pages) Freescale Semiconductor, Inc – MC9S12G Family Reference Manual and Data Sheet

240 KByte Flash Module (S12FTMRG240K2V1)
indicated by reset condition F in Figure 31-6. If a double bit fault is detected while reading the P-Flash
phrase containing the Flash security byte during the reset sequence, all bits in the FSEC register will be set
to leave the Flash module in a secured state with backdoor key access disabled.
Table 31-9. FSEC Field Descriptions
Field
Description
7–6
Backdoor Key Security Enable Bits — The KEYEN[1:0] bits define the enabling of backdoor key access to the
KEYEN[1:0] Flash module as shown in Table 31-10.
5–2
Reserved Nonvolatile Bits — The RNV bits should remain in the erased state for future enhancements.
RNV[5:2]
1–0
Flash Security Bits — The SEC[1:0] bits define the security state of the MCU as shown in Table 31-11. If the
SEC[1:0] Flash module is unsecured using backdoor key access, the SEC bits are forced to 10.
Table 31-10. Flash KEYEN States
KEYEN[1:0]
Status of Backdoor Key Access
00
DISABLED
01
DISABLED¹
10
ENABLED
11
DISABLED
1 _{Preferred KEYEN state to disable backdoor key access.}
Table 31-11. Flash Security States
SEC[1:0]
Status of Security
00
SECURED
01
SECURED¹
10
UNSECURED
11
SECURED
1 _{Preferred SEC state to set MCU to secured state.}
The security function in the Flash module is described in Section 31.5.
31.3.2.3 Flash CCOB Index Register (FCCOBIX)
The FCCOBIX register is used to index the FCCOB register for Flash memory operations.
Offset Module Base + 0x0002
7
R
0
W
Reset
0
6
5
4
3
2
0
0
0
0
0
0
0
0
0
= Unimplemented or Reserved
Figure 31-7. FCCOB Index Register (FCCOBIX)
1
CCOBIX[2:0]
0
Freescale Semiconductor
MC9S12G Family Reference Manual, Rev.1.23
0
0
1151