English
Language : 

MC9S12GRMV1 Datasheet, PDF (563/1292 Pages) Freescale Semiconductor, Inc – MC9S12G Family Reference Manual and Data Sheet
Analog-to-Digital Converter (ADC12B16CV2)
Table 16-16. ATDSTAT0 Field Descriptions (continued)
Field
3–0
CC[3:0]
Description
Conversion Counter — These 4 read-only bits are the binary value of the conversion counter. The conversion
counter points to the result register that will receive the result of the current conversion. E.g. CC3=0, CC2=1,
CC1=1, CC0=0 indicates that the result of the current conversion will be in ATD Result Register 6. If in non-FIFO
mode (FIFO=0) the conversion counter is initialized to zero at the beginning and end of the conversion sequence.
If in FIFO mode (FIFO=1) the register counter is not initialized. The conversion counter wraps around when its
maximum value is reached.
Aborting a conversion or starting a new conversion clears the conversion counter even if FIFO=1.
16.3.2.8 ATD Compare Enable Register (ATDCMPE)
Writes to this register will abort current conversion sequence.
Read: Anytime
Write: Anytime
Module Base + 0x0008
15
14
13
R
W
11
10
9
8
7
6
5
4
3
2
1
0
CMPE[15:0]
Reset 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
= Unimplemented or Reserved
Figure 16-10. ATD Compare Enable Register (ATDCMPE)
Table 16-17. ATDCMPE Field Descriptions
Field
Description
15–0 Compare Enable for Conversion Number n (n= 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0) of a Sequence
CMPE[15:0] (n conversion number, NOT channel number!) — These bits enable automatic compare of conversion results
individually for conversions of a sequence. The sense of each comparison is determined by the CMPHT[n] bit in
the ATDCMPHT register.
For each conversion number with CMPE[n]=1 do the following:
1) Write compare value to ATDDRn result register
2) Write compare operator with CMPHT[n] in ATDCPMHT register
CCF[n] in ATDSTAT2 register will flag individual success of any comparison.
0 No automatic compare
1 Automatic compare of results for conversion n of a sequence is enabled.
MC9S12G Family Reference Manual, Rev.1.23
Freescale Semiconductor
565