MC9S12GRMV1 Datasheet, PDF (329/1292 Pages) Freescale Semiconductor, Inc – MC9S12G Family Reference Manual and Data Sheet

S12S Debug Module (S12SDBGV2)
8.3.2.8.5 Debug Comparator Data High Register (DBGADH)
Address: 0x002C
R
W
Reset
7
Bit 15
0
6
Bit 14
0
5
Bit 13
0
4
Bit 12
0
3
Bit 11
0
2
Bit 10
0
1
Bit 9
0
0
Bit 8
0
Figure 8-19. Debug Comparator Data High Register (DBGADH)
Read: If COMRV[1:0] = 00
Write: If COMRV[1:0] = 00 and DBG not armed.
Table 8-28. DBGADH Field Descriptions
Field
Description
7–0
Bits[15:8]
Comparator Data High Compare Bits— The Comparator data high compare bits control whether the selected
comparator compares the data bus bits [15:8] to a logic one or logic zero. The comparator data compare bits are
only used in comparison if the corresponding data mask bit is logic 1. This register is available only for
comparator A. Data bus comparisons are only performed if the TAG bit in DBGACTL is clear.
0 Compare corresponding data bit to a logic zero
1 Compare corresponding data bit to a logic one
8.3.2.8.6 Debug Comparator Data Low Register (DBGADL)
Address: 0x002D
R
W
Reset
7
Bit 7
0
6
Bit 6
0
5
Bit 5
0
4
Bit 4
0
3
Bit 3
0
2
Bit 2
0
1
Bit 1
0
0
Bit 0
0
Figure 8-20. Debug Comparator Data Low Register (DBGADL)
Read: If COMRV[1:0] = 00
Write: If COMRV[1:0] = 00 and DBG not armed.
Table 8-29. DBGADL Field Descriptions
Field
7–0
Bits[7:0]
Description
Comparator Data Low Compare Bits — The Comparator data low compare bits control whether the selected
comparator compares the data bus bits [7:0] to a logic one or logic zero. The comparator data compare bits are
only used in comparison if the corresponding data mask bit is logic 1. This register is available only for
comparator A. Data bus comparisons are only performed if the TAG bit in DBGACTL is clear
0 Compare corresponding data bit to a logic zero
1 Compare corresponding data bit to a logic one
MC9S12G Family Reference Manual, Rev.1.23
Freescale Semiconductor
331