S912XEG384J3VA Datasheet, PDF (991/1324 Pages) Freescale Semiconductor, Inc – MC9S12XEP100 Reference Manual Covers MC9S12XE Family

Chapter 26 384 KByte Flash Module (S12XFTM384K2V1)
Table 26-36. Erase Verify Block Command Error Handling
Register
Error Bit
Error Condition
Set if CCOBIX[2:0] != 000 at command launch
FSTAT
ACCERR
FPVIOL
MGSTAT1
MGSTAT0
Set if a Load Data Field command sequence is currently active
Set if an invalid global address [22:16] is supplied⁽¹⁾
None
Set if any errors have been encountered during the read⁽²⁾
Set if any non-correctable errors have been encountered during the read²
FERSTAT
EPVIOLIF None
1. As defined by the memory map for FTM512K3.
2. As found in the memory map for FTM512K3.
26.4.2.3 Erase Verify P-Flash Section Command
The Erase Verify P-Flash Section command will verify that a section of code in the P-Flash memory is
erased. The Erase Verify P-Flash Section command defines the starting point of the code to be verified and
the number of phrases. The section to be verified cannot cross a 256 Kbyte boundary in the P-Flash
memory space.
Table 26-37. Erase Verify P-Flash Section Command FCCOB Requirements
CCOBIX[2:0]
FCCOB Parameters
000
0x03
Global address [22:16] of
a P-Flash block
001
Global address [15:0] of the first phrase to be verified
010
Number of phrases to be verified
Upon clearing CCIF to launch the Erase Verify P-Flash Section command, the Memory Controller will
verify the selected section of Flash memory is erased. The CCIF flag will set after the Erase Verify P-Flash
Section operation has completed.
MC9S12XE-Family Reference Manual Rev. 1.25
Freescale Semiconductor
991