S912XEG384J3VA Datasheet, PDF (145/1324 Pages) Freescale Semiconductor, Inc – MC9S12XEP100 Reference Manual Covers MC9S12XE Family

1. Read: Anytime.
Write: Anytime.
Chapter 2 Port Integration Module (S12XEPIMV1)
Table 2-51. DDRH Register Field Descriptions
Field
7
DDRH
6
DDRH
5
DDRH
4
DDRH
3
DDRH
2
DDRH
Description
Port H data direction—
This register controls the data direction of pin 7.
The enabled SCI5 forces the I/O state to be an output. Depending on the configuration of the enabled routed SPI2
this pin will be forced to be input or output. In those cases the data direction bits will not change. The DDRM bits
revert to controlling the I/O direction of a pin when the associated peripheral module is disabled.
1 Associated pin is configured as output.
0 Associated pin is configured as input.
Port H data direction—
This register controls the data direction of pin 6.
The enabled SCI5 forces the I/O state to be an input. Depending on the configuration of the enabled routed SPI2
this pin will be forced to be input or output. In those cases the data direction bits will not change. The DDRM bits
revert to controlling the I/O direction of a pin when the associated peripheral module is disabled.
1 Associated pin is configured as output.
0 Associated pin is configured as input.
Port H data direction—
This register controls the data direction of pin 5.
The enabled SCI4 forces the I/O state to be an output. Depending on the configuration of the enabled routed SPI2
this pin will be forced to be input or output. In those cases the data direction bits will not change. The DDRM bits
revert to controlling the I/O direction of a pin when the associated peripheral module is disabled.
1 Associated pin is configured as output.
0 Associated pin is configured as input.
Port H data direction—
This register controls the data direction of pin 4.
The enabled SCI4 forces the I/O state to be an input. Depending on the configuration of the enabled routed SPI2
this pin will be forced to be input or output. In those cases the data direction bits will not change. The DDRM bits
revert to controlling the I/O direction of a pin when the associated peripheral module is disabled.
1 Associated pin is configured as output.
0 Associated pin is configured as input.
Port H data direction—
This register controls the data direction of pin 3.
The enabled SCI7 forces the I/O state to be an output. Depending on the configuration of the enabled routed SPI1
this pin will be forced to be input or output. In those cases the data direction bits will not change. The DDRM bits
revert to controlling the I/O direction of a pin when the associated peripheral module is disabled.
1 Associated pin is configured as output.
0 Associated pin is configured as input.
Port H data direction—
This register controls the data direction of pin 2.
The enabled SCI7 forces the I/O state to be an input. Depending on the configuration of the enabled routed SPI1
this pin will be forced to be input or output. In those cases the data direction bits will not change. The DDRM bits
revert to controlling the I/O direction of a pin when the associated peripheral module is disabled.
1 Associated pin is configured as output.
0 Associated pin is configured as input.
MC9S12XE-Family Reference Manual Rev. 1.25
Freescale Semiconductor
145