S912XEG384J3VA Datasheet, PDF (1015/1324 Pages) Freescale Semiconductor, Inc – MC9S12XEP100 Reference Manual Covers MC9S12XE Family

Chapter 27
512 KByte Flash Module (S12XFTM512K3V1)
Revision
Number
V01.09
V01.10
V01.11
Revision
Date
14 Nov 2007
19 Dec 2007
25 Sep 2009
Table 27-1. Revision History
Sections
Affected
Description of Changes
27.5.2/27-1075
27.4.2/27-1051
27.4.2.8/27-
1057
- Changed terminology from ‘word program’ to “Program P-Flash’ in the BDM
unsecuring description, Section 27.5.2
- Added requirement that user not write any Flash module register during
execution of commands ‘Erase All Blocks’, Section 27.4.2.8, and ‘Unsecure
Flash’, Section 27.4.2.11
- Added statement that security is released upon successful completion of
command ‘Erase All Blocks’, Section 27.4.2.8
27.4.2/27-1051 - Corrected Error Handling table for Full Partition D-Flash, Partition D-Flash,
and EEPROM Emulation Query commands
27.1/27-1016
27.3.2.1/27-
1027
27.4.2.4/27-
1054
27.4.2.7/27-
1056
27.4.2.12/27-
1060
27.4.2.12/27-
1060
27.4.2.12/27-
1060
27.4.2.20/27-
1069
- Clarify single bit fault correction for P-Flash phrase
- Expand FDIV vs OSCCLK Frequency table
- Add statement concerning code runaway when executing Read Once
command from Flash block containing associated fields
- Add statement concerning code runaway when executing Program Once
command from Flash block containing associated fields
- Add statement concerning code runaway when executing Verify Backdoor
Access Key command from Flash block containing associated fields
- Relate Key 0 to associated Backdoor Comparison Key address
- Change “power down reset” to “reset”
- Add ACCERR condition for Disable EEPROM Emulation command
The following changes were made to clarify module behavior related to Flash
register access during reset sequence and while Flash commands are active:
- Add caution concerning register writes while command is active
- Writes to FCLKDIV are allowed during reset sequence while CCIF is clear
- Add caution concerning register writes while command is active
- Writes to FCCOBIX, FCCOBHI, FCCOBLO registers are ignored during
reset sequence
27.3.2/27-1025
27.3.2.1/27-
1027
27.4.1.2/27-
1046
27.6/27-1075
Freescale Semiconductor
MC9S12XE-Family Reference Manual Rev. 1.25
1015