S912XEG384J3VA Datasheet, PDF (1322/1324 Pages) Freescale Semiconductor, Inc – MC9S12XEP100 Reference Manual Covers MC9S12XE Family

Appendix F Ordering Information
Appendix F
Ordering Information
Customers can choose between ordering either the mask-specific partnumber or the generic / mask-
independent partnumber. Ordering the mask-specific partnumber enables the customer to specify which
particular maskset they receive whereas ordering the generic maskset means that the currently preferred
maskset (which may change over time) is shipped. In either case, the marking on the device will always
show the generic / mask-independent partnumber and the mask set number.
NOTE
The mask identifier suffix and the Tape & Reel suffix are always both omitted from the
partnumber which is actually marked on the device.
For specific partnumbers to order, please contact your local sales office. The below figure illustrates the
structure of a typical mask-specific ordering number for the MC9S12XE-Family devices
S 9 12X EP100 J1 C AG R
Tape & Reel
R = Tape & Reel
No R = No Tape & Reel
AA = 80 QFP
Package Option
AL = 112 LQFP
AG = 144 LQFP
VL = 208 MAPBGA
Temperature Option ^{C = -40˚C to 85˚C}
V = -40˚C to 105˚C
M = -40˚C to 125˚C
Maskset identifier Suffix
First digit references fab
J=TSMC3, F=ATMC,
W=TSMC11, Blank= flexible fab
Second digit refers to mask or firmware revision
Numeric second digit = mask rev. (e.g.1=1M48H)
A=firmware revA, version ID=0xFFFF
B=firmware revB, version ID=0x0004
(This suffix is omitted in generic partnumbers)
Device Title
Controller Family
Main Memory Type:
9 = Flash
3 = ROM (if available)
Status / Partnumber type:
S or SC = Maskset specific partnumber
MC = Generic / mask-independent partnumber
P or PC = prototype status (pre qualification)
Figure F-1. Order Part Number Example
1322
MC9S12XE-Family Reference Manual Rev. 1.25
Freescale Semiconductor