S912XEG384J3VA Datasheet, PDF (1069/1324 Pages) Freescale Semiconductor, Inc – MC9S12XEP100 Reference Manual Covers MC9S12XE Family

Chapter 27 512 KByte Flash Module (S12XFTM512K3V1)
27.4.2.20 Disable EEPROM Emulation Command
The Disable EEPROM Emulation command causes the Memory Controller to suspend current EEE
activity.
Table 27-73. Disable EEPROM Emulation Command FCCOB Requirements
CCOBIX[2:0]
000
FCCOB Parameters
0x14
Not required
Upon clearing CCIF to launch the Disable EEPROM Emulation command, the Memory Controller will
halt EEE operations at the next convenient point without clearing the EEE tag RAM or tag counter before
setting the CCIF flag.
Table 27-74. Disable EEPROM Emulation Command Error Handling
Register
FSTAT
FERSTAT
Error Bit
ACCERR
FPVIOL
MGSTAT1
MGSTAT0
EPVIOLIF
Error Condition
Set if CCOBIX[2:0] != 000 at command launch
Set if a Load Data Field command sequence is currently active
Set if Full Partition D-Flash or Partition D-Flash command not previously run
None
None
None
None
27.4.2.21 EEPROM Emulation Query Command
The EEPROM Emulation Query command returns EEE partition and status variables.
Table 27-75. EEPROM Emulation Query Command FCCOB Requirements
CCOBIX[2:0]
FCCOB Parameters
000
0x15
Not required
001
Return DFPART
010
Return ERPART
011
Return ECOUNT⁽¹⁾
100
Return Dead Sector Count Return Ready Sector Count
1. Indicates sector erase count
Upon clearing CCIF to launch the EEPROM Emulation Query command, the CCIF flag will set after the
EEE partition and status variables are stored in the FCCOBIX register.If the Emulation Query command
is executed prior to partitioning (Partition D-Flash Command Section 27.4.2.15), the following reset
values are returned: DFPART = 0x_FFFF, ERPART = 0x_FFFF, ECOUNT = 0x_FFFF, Dead Sector
Count = 0x_00, Ready Sector Count = 0x_00.
Freescale Semiconductor
MC9S12XE-Family Reference Manual Rev. 1.25
1069