S912XEG384J3VA Datasheet, PDF (738/1324 Pages) Freescale Semiconductor, Inc – MC9S12XEP100 Reference Manual Covers MC9S12XE Family

Chapter 20 Serial Communication Interface (S12SCIV5)
20.3.2.9 SCI Data Registers (SCIDRH, SCIDRL)
Module Base + 0x0006
7
6
5
4
3
2
1
0
R
R8
0
0
0
0
0
0
T8
W
Reset
0
0
0
0
0
0
0
0
= Unimplemented or Reserved
Figure 20-12. SCI Data Registers (SCIDRH)
Module Base + 0x0007
7
6
5
4
3
2
1
0
R
R7
R6
R5
R4
R3
R2
R1
R0
W
T7
T6
T5
T4
T3
T2
T1
T0
Reset
0
0
0
0
0
0
0
0
Figure 20-13. SCI Data Registers (SCIDRL)
Read: Anytime; reading accesses SCI receive data register
Write: Anytime; writing accesses SCI transmit data register; writing to R8 has no effect
Table 20-13. SCIDRH and SCIDRL Field Descriptions
Field
SCIDRH
7
R8
SCIDRH
6
T8
SCIDRL
7:0
R[7:0]
T[7:0]
Description
Received Bit 8 — R8 is the ninth data bit received when the SCI is configured for 9-bit data format (M = 1).
Transmit Bit 8 — T8 is the ninth data bit transmitted when the SCI is configured for 9-bit data format (M = 1).
R7:R0 — Received bits seven through zero for 9-bit or 8-bit data formats
T7:T0 — Transmit bits seven through zero for 9-bit or 8-bit formats
NOTE
If the value of T8 is the same as in the previous transmission, T8 does not
have to be rewritten.The same value is transmitted until T8 is rewritten
In 8-bit data format, only SCI data register low (SCIDRL) needs to be
accessed.
When transmitting in 9-bit data format and using 8-bit write instructions,
write first to SCI data register high (SCIDRH), then SCIDRL.
MC9S12XE-Family Reference Manual Rev. 1.25
738
Freescale Semiconductor