HD6473847RHV Datasheet, PDF (8/546 Pages) Renesas Technology Corp – Renesas 8-Bit Single-Chip Microcomputer H8 Family / H8/300L Super Low Power Series

Item
H8/3802 Group
H8/38004 Group
H8/38002S
Group
H8/38104 Group
ZTAT Mask ROM Flash ROM Mask ROM Mask ROM Flash ROM Mask ROM
Package
FP-64A
FP-64A
FP-64A
FP-64A
FP-64A
FP-64A
FP-64A
FP-64E
FP-64E
FP-64E
FP-64E FP-64K* FP-64E
FP-64E
TNP-64B TNP-64B TNP-64B
DP-64S
DP-64S
die
die
Operating temperature
Note: * Under development.
Standard specifications: –20 to 75°C, WTR: –40 to 85°C
Target Users:
This manual was written for users who will be using the H8/3802 Group,
H8/38004 Group, H8/38002S Group, and H8/38104 Group in the design of
application systems. Target users are expected to understand the fundamentals of
electrical circuits, logical circuits, and microcomputers.
Objective:
This manual was written to explain the hardware functions and electrical
characteristics of the H8/3802 Group, H8/38004 Group, H8/38002S Group, and
H8/38104 Group to the target users.
Refer to the H8/300L Series Software Manual for a detailed description of the
instruction set.
Notes on reading this manual:
• In order to understand the overall functions of the chip
Read the manual according to the contents. This manual can be roughly categorized into parts
on the CPU, system control functions, peripheral functions and electrical characteristics.
• In order to understand the details of the CPU's functions
Read the H8/300L Series Software Manual.
• In order to understand the details of a register when its name is known
Read the index that is the final part of the manual to find the page number of the entry on the
register. The addresses, bits, and initial values of the registers are summarized in section 14,
List of Registers.
Example:
Bit order:
The MSB is on the left and the LSB is on the right.
Notes:
The following limitations apply to H8/38004, H8/38002, H8/38104, and H8/38102 programming
and debugging when the on-chip emulator is used.
1. Pin P95 is not available because it is used exclusively by the on-chip emulator.
2. Pins P33, P34, and P35 are unavailable for use. In order to use these pins additional hardware
must be mounted on the user board.
Rev. 7.00 Mar. 08, 2010 Page vi of xxx
REJ09B0024-0700