EP2S90F1020C5 Datasheet, PDF (134/768 Pages) Altera Corporation – Stratix II Device Handbook, Volume 1

Configuration
f
error status information. This dedicated remote system upgrade circuitry
avoids system downtime and is the critical component for successful
remote system upgrades.
RSC is supported in the following Stratix II configuration schemes: FPP,
AS, PS, and PPA. RSC can also be implemented in conjunction with
advanced Stratix II features such as real-time decompression of
configuration data and design security using AES for secure and efficient
field upgrades.
See the Remote System Upgrades With Stratix II & Stratix II GX Devices
chapter in volume 2 of the Stratix II Device Handbook or the Stratix II GX
Device Handbook for more information about remote configuration in
Stratix II devices.
f
Configuring Stratix II FPGAs with JRunner
JRunner is a software driver that configures Altera FPGAs, including
Stratix II FPGAs, through the ByteBlaster II or ByteBlasterMV cables in
JTAG mode. The programming input file supported is in Raw Binary File
(.rbf) format. JRunner also requires a Chain Description File (.cdf)
generated by the Quartus II software. JRunner is targeted for embedded
JTAG configuration. The source code is developed for the Windows NT
operating system (OS), but can be customized to run on other platforms.
For more information on the JRunner software driver, see the JRunner
Software Driver: An Embedded Solution to the JTAG Configuration White
Paper and the source files on the Altera web site (www.altera.com).
f
f
Programming Serial Configuration Devices with SRunner
A serial configuration device can be programmed in-system by an
external microprocessor using SRunner. SRunner is a software driver
developed for embedded serial configuration device programming that
can be easily customized to fit in different embedded systems. SRunner is
able to read a .rpd file (Raw Programming Data) and write to the serial
configuration devices. The serial configuration device programming time
using SRunner is comparable to the programming time when using the
Quartus II software.
For more information about SRunner, see the SRunner: An Embedded
Solution for EPCS Programming White Paper and the source code on the
Altera web site at www.altera.com.
For more information on programming serial configuration devices, see
the Serial Configuration Devices (EPCS1 & EPCS4) Data Sheet in the
Configuration Handbook.
3–10
Stratix II Device Handbook, Volume 1
Altera Corporation
May 2007