HD64F2357VF13 Datasheet, PDF (472/1049 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

12.3 Operation
12.3.1 TCNT Incrementation Timing
TCNT is incremented by input clock pulses (either internal or external).
Internal Clock: Three different internal clock signals (ø/8, ø/64, or ø/8192) divided from the system clock (ø) can be
selected, by setting bits CKS2 to CKS0 in TCR. Figure 12-2 shows the count timing.
ø
Internal clock
Clock input
to TCNT
TCNT
N–1
N
N+1
Figure 12-2 Count Timing for Internal Clock Input
External Clock: Three incrementation methods can be selected by setting bits CKS2 to CKS0 in TCR: at the rising edge,
the falling edge, and both rising and falling edges.
Note that the external clock pulse width must be at least 1.5 states for incrementation at a single edge, and at least 2.5
states for incrementation at both edges. The counter will not increment correctly if the pulse width is less than these
values.
Figure 12-3 shows the timing of incrementation at both edges of an external clock signal.
ø
External clock
input
Clock input
to TCNT
TCNT
N–1
N
N+1
Figure 12-3 Count Timing for External Clock Input
Rev.6.00 Oct.28.2004 page 442 of 1016
REJ09B0138-0600H