UPSD33XX Datasheet, PDF (206/231 Pages) STMicroelectronics – Fast 8032 MCU with Programmable Logic

uPSD33xx
Table 128. Major Parameters
Parameter
Operating Voltage
Operating Temperature
MCU Frequency
Active Current, Typical
(20% of PLD used; 25°C
operation)
Idle Current, Typical
(20% of PLD used; 25°C
operation)
Standby Current, Typical
SRAM Backup Current, Typical
I/O Sink/Source Current,
Ports A, B, C, and D
I/O Sink/Source Current,
Port 4
PLD Macrocells
PLD Inputs
PLD Outputs
PLD Propagation Delay, Typical,
Turbo Mode
Test Conditions/Comments
–
–
8MHz (min) for I²C
40MHz Crystal, Turbo
40MHz Crystal, Non-Turbo
8MHz Crystal, Turbo
8MHz Crystal, Non-Turbo
40MHz Crystal divided by 2048
internally.
All interfaces are disabled.
Power-down Mode
needs reset to exit.
If external battery is attached.
V_OL = 0.45V (max);
V_OH = 2.4V (min)
V_OL = 0.6V (max);
V_OH = 2.4V (min)
For registered or
combinatorial logic
Inputs from pins, feedback,
or MCU addresses
Output to pins or
internal feedback
PLD input to output
5.0V Value
4.5 to 5.5 (PSD);
3.0 to 3.6 (MCU)
–40 to 85
1 Min, 40 Max
50
48
21
10
3.3V Value Unit
3.0 to 3.6
(PSD and MCU)
V
–40 to 85
°C
1 Min, 40 Max MHz
40
mA
38
mA
18
mA
8
mA
16
11
mA
140
0.5
I_OL = 8 (max);
I_OH = –2 (min)
I_OL = 10 (max);
I_OH = –10 (min)
16
120
µA
0.5
µA
I_OL = 4 (max);
I_OH = –1 (min)
mA
I_OL = 10 (max);
I_OH = –10 (min)
mA
16
–
69
69
–
18
18
–
15
22
ns
206/231