M1AFS600-PQ208 Datasheet, PDF (322/334 Pages) Microsemi Corporation – Fusion Family of Mixed Signal FPGAs

Datasheet Information
Revision
v2.0, Revision 1
(continued)
Changes
Page
The data in the 2.5 V LCMOS and LVCMOS 2.5 V / 5.0 V rows were updated in
Table 2-75 • Fusion Standard and Advanced I/O – Hot-Swap and 5 V Input Tolerance
Capabilities.
2-146
In Table 2-78 • Fusion Standard I/O Standards—OUT_DRIVE Settings, LVCMOS 2-155
1.5 V, for OUT_DRIVE 2, was changed from a dash to a check mark.
The "VCC15A Analog Power Supply (1.5 V)" definition was changed from "A 1.5 V
analog power supply input should be used to provide this input" to "1.5 V clean
analog power supply input for use by the 1.5 V portion of the analog circuitry."
2-226
In the "VCC33PMP Analog Power Supply (3.3 V)" pin description, the following text
was changed from "VCC33PMP should be powered up before or simultaneously
with VCC33A" to "VCC33PMP should be powered up simultaneously with or after
VCC33A."
2-226
The "VCCOSC Oscillator Power Supply (3.3 V)" section was updated to include 2-227
information about when to power the pin.
In the "128-Bit AES Decryption" section, FIPS-192 was incorrect and changed to 2-231
FIPS-197.
The note in Table 2-84 • Fusion Standard and Advanced I/O Attributes vs. I/O 2-159
Standard Applications was updated.
For 1.5 V LVCMOS, the VIL and VIH parameters, 0.30 * VCCI was changed to 0.35 *
VCCI and 0.70 * VCCI was changed to 0.65 * VCCI in Table 2-86 • Summary of
Maximum and Minimum DC Input and Output Levels Applicable to Commercial and
Industrial Conditions, Table 2-87 • Summary of Maximum and Minimum DC Input
and Output Levels Applicable to Commercial and Industrial Conditions, and
Table 2-88 • Summary of Maximum and Minimum DC Input and Output Levels
Applicable to Commercial and Industrial Conditions.
In Table 2-87 • Summary of Maximum and Minimum DC Input and Output Levels
Applicable to Commercial and Industrial Conditions, the VIH max column was
updated.
2-167 to
2-168
Table 2-89 • Summary of Maximum and Minimum DC Input Levels Applicable to
Commercial and Industrial Conditions was updated to include notes 3 and 4. The
temperature ranges were also updated in notes 1 and 2.
2-168
The titles in Table 2-92 • Summary of I/O Timing Characteristics – Software Default 2-170 to
Settings to Table 2-94 • Summary of I/O Timing Characteristics – Software Default 2-171
Settings were updated to "VCCI = I/O Standard Dependent."
Below Table 2-98 • I/O Short Currents IOSH/IOSL, the paragraph was updated to 2-175
change 110°C to 100°C and three months was changed to six months.
Table 2-99 • Short Current Event Duration before Failure was updated to remove 2-177
110°C data.
In Table 2-101 • I/O Input Rise Time, Fall Time, and Related I/O Reliability, 2-177
LVTTL/LVCMOS rows were changed from 110°C to 100°C.
VCC33PMP was added to Table 3-1 • Absolute Maximum Ratings. In addition, 3-1
conditions for AV, AC, AG, and AT were also updated.
VCC33PMP was added to Table 3-2 • Recommended Operating Conditions1. In 3-3
addition, conditions for AV, AC, AG, and AT were also updated.
Table 3-5 • FPGA Programming, Storage, and Operating Limits was updated to 3-5
include new data and the temperature ranges were changed. The notes were
removed from the table.
5-6
Revision 4