M1AFS600-PQ208 Datasheet, PDF (252/334 Pages) Microsemi Corporation – Fusion Family of Mixed Signal FPGAs

DC and Power Characteristics
Table 3-1 • Absolute Maximum Ratings (continued)
Symbol
Parameter
Commercial
Industrial
Units
AV, AC
Unpowered, ADC reset asserted or
unconfigured
–11.0 to 12.6
–11.0 to 12.0
V
Analog input (+16 V to +2 V prescaler range)
–0.4 to 12.6
–0.4 to 12.0
V
Analog input (+1 V to +0.125 V prescaler
range)
–0.4 to 3.75
–0.4 to 3.75
V
Analog input (–16 V to –2 V prescaler range)
–11.0 to 0.4
–11.0 to 0.4
V
Analog input (–1 V to –0.125 V prescaler
range)
–3.75 to 0.4
–3.75 to 0.4
V
Analog input (direct input to ADC)
–0.4 to 3.75
–0.4 to 3.75
V
Digital input
–0.4 to 12.6
–0.4 to 12.0
V
AG
Unpowered, ADC reset asserted or –11.0 to 12.6
unconfigured
–11.0 to 12.0
V
Low Current Mode (1 µA, 3 µA, 10 µA, 30 µA)
–0.4 to 12.6
–0.4 to 12.0
V
Low Current Mode (–1 µA, –3 µA, –10 µA, –30
µA)
High Current Mode ³
–11.0 to 0.4
–11.0 to 12.6
–11.0 to 0.4
V
–11.0 to 12.0
V
AT
Unpowered, ADC reset asserted or
–0.4 to 16.0
unconfigured
–0.4 to 15.0
V
Analog input (+16 V, 4 V prescaler range)
–0.4 to 16.0
–0.4 to 15.0
V
Analog input (direct input to ADC)
–0.4 to 3.75
–0.4 to 3.75
V
Digital input
–0.4 to 16.0
–0.4 to 15.0
V
T_STG ⁴
T_J ⁴
Storage temperature
Junction temperature
–65 to +150
°C
+125
°C
Notes:
1. The device should be operated within the limits specified by the datasheet. During transitions, the input signal may
undershoot or overshoot according to the limits shown in Table 3-4 on page 3-4.
2. Analog data not valid beyond 3.65 V.
3. The high current mode has a maximum power limit of 20 mW. Appropriate current limit resistors must be used, based on
voltage on the pad.
4. For flash programming and retention maximum limits, refer to Table 3-5 on page 3-5. For recommended operating limits
refer to Table 3-2 on page 3-3.
3-2
Revision 4