M1AFS600-PQ208 Datasheet, PDF (261/334 Pages) Microsemi Corporation – Fusion Family of Mixed Signal FPGAs

Fusion Family of Mixed Signal FPGAs
Table 3-8 • AFS1500 Quiescent Supply Current Characteristics (continued)
Parameter
IJTAG
Description
JTAG I/O quiescent
current
Conditions
Operational standby⁴,
VJTAG = 3.63 V
Standby mode⁵ or Sleep mode⁶,
VJTAG = 0 V
Temp. Min. Typ. Max. Unit
T_J = 25°C
T_J = 85°C
T_J = 100°C
80 100 µA
80 100 µA
80 100 µA
0
0 µA
IPP
Programming supply Non-programming mode,
current
VPUMP = 3.63 V
T_J = 25°C
T_J = 85°C
39 80 µA
40 80 µA
Standby mode⁵ or Sleep mode⁶,
VPUMP = 0 V
T_J = 100°C
40 80 µA
0
0 µA
ICCNVM
Embedded NVM
current
Reset asserted, V_CCNVM = 1.575 V
T_J = 25°C
T_J =85°C
50 150 µA
50 150 µA
T_J = 100°C
50 150 µA
ICCPLL
1.5 V PLL quiescent
current
Operational standby
, VCCPLL = 1.575 V
T_J = 25°C
T_J = 85°C
130 200 µA
130 200 µA
T_J = 100°C
130 200 µA
Notes:
1. ICC is the 1.5 V power supplies, ICC and ICC15A.
2. ICC33A includes ICC33A, ICC33PMP, and ICCOSC.
3. ICCI includes all ICCI0, ICCI1, ICCI2, and ICCI4.
4. Operational standby is when the Fusion device is powered up, all blocks are used, no I/O is toggling, Voltage Regulator is
loaded with 200 mA, VCC33PMP is ON, XTAL is ON, and ADC is ON.
5. XTAL is configured as high gain, VCC = VJTAG = VPUMP = 0 V.
6. Sleep Mode, VCC = VJTAG = VPUMP = 0 V.
Revision 4
3- 11