M1AFS600-PQ208 Datasheet, PDF (266/334 Pages) Microsemi Corporation – Fusion Family of Mixed Signal FPGAs

DC and Power Characteristics
Table 3-11 • AFS090 Quiescent Supply Current Characteristics
Parameter
ICC¹
ICC33²
ICCI³
IJTAG
Description
Conditions
Temp. Min Typ Max Unit
1.5 V quiescent current
Operational standby⁴,
VCC = 1.575 V
T_J = 25°C
T_J = 85°C
5 7.5 mA
6.5 20 mA
3.3 V analog supplies
current
Standby mode⁵ or Sleep
mode⁶, V_CC = 0 V
Operational standby⁴,
VCC33 = 3.63 V
T_J = 100°C
T_J = 25°C
T_J = 85°C
14 48 mA
0 0 µA
9.8 12 mA
9.8 12 mA
T_J = 100°C
10.7 15 mA
Operational standby, only
Analog Quad and –3.3 V
output ON, VCC33 = 3.63 V
Standby mode⁵,
VCC33 = 3.63 V
T_J = 25°C
T_J = 85°C
T_J = 100°C
T_J = 25°C
T_J = 85°C
0.30 2 mA
0.30 2 mA
0.45 2 mA
2.9 2.9 mA
2.9 3.0 mA
T_J = 100°C
Sleep mode⁶, VCC33 = 3.63 V T_J = 25°C
3.5 6 mA
17 18 µA
T_J = 85°C
18 20 µA
I/O quiescent current
Operational standby⁶,
VCCIx = 3.63 V
T_J = 100°C
T_J = 25°C
T_J = 85°C
24 25 µA
260 437 µA
260 437 µA
JTAG I/O quiescent current Operational standby⁴,
VJTAG = 3.63 V
T_J = 100°C
T_J = 25°C
T_J = 85°C
260 437 µA
80 100 µA
80 100 µA
Standby mode⁵ or Sleep
mode⁶, VJTAG = 0 V
T_J = 100°C
80 100 µA
0 0 µA
IPP
Programming supply
Non-programming mode,
T_J = 25°C
37 80 µA
current
VPUMP = 3.63 V
Standby mode⁵ or Sleep
mode⁶, VPUMP = 0 V
T_J = 85°C
T_J = 100°C
37 80 µA
80 100 µA
0 0 µA
Notes:
1. ICC is the 1.5 V power supplies, ICC, ICCPLL, ICC15A, ICCNVM.
2. ICC33A includes ICC33A, ICC33PMP, and ICCOSC.
3. ICCI includes all ICCI0, ICCI1, and ICCI2.
4. Operational standby is when the Fusion device is powered up, all blocks are used, no I/O is toggling, Voltage Regulator is
loaded with 200 mA, VCC33PMP is ON, XTAL is ON, and ADC is ON.
5. XTAL is configured as high gain, VCC = VJTAG = VPUMP = 0 V.
6. Sleep Mode, VCC = VJTAG = VPUMP = 0 V.
3-16
Revision 4